Fastrack Superflat Floors
Do you require large floors with very high tolerances, but have a tight schedule?
Our unique combination of high output Laser Screed® floor construction and Laser Grinding system offer a fastrack and a perfect solution.
No other flooring contractor can provide this complete comprehensive service.
Superflat Fastrack Flooring Laser Screed® & Laser Grinder®
Building floors to very high tolerances can be very time consuming. However the high tolerance fastrack superflat Laser Screed®/Laser Grind solution removes the flooring works off the critical path. Once the roof and walls are built, we can construct up to 1,500m2 of FM2 ground supported floor per day, making short work of large floor areas. Then overhead services and racking can be fitted while the aisles are being ground to tolerance with our patented system, the Laser Grinder®. Our cast-grind solution can save weeks off the building program.
Main advantages of a floor built using Laser Sceed®
- High quality, high output technique allows up to 2,000m2 to be constructed in a single day.
- Laser control ensures that a good standard of accuracy is maintained throughout each pour. This can reduce the amount of grinding required if the floor is later converted for defined traffic use in narrow aisles.
- Floor areas of up to 2,000m2 can be installed using ‘Joint-less’, steel fibre reinforcement.
- Surface finishes can be applied by an additional topping spreader during the construction stage to ensure a monolithic slab. These are usually dry-shake hardeners or coloured toppings.
- As each large section of floor is completed and handed over, other trades can start their work whilst the remainder of the floor is constructed.
- Construction programmes can usually be reduced by significant amounts, giving a client / end user early occupation.
- Many flooring contractors are able to install good quality Laser Screed® floors.
The benefits of using the Laser Grinder® process
- Up to 100 linear metres of narrow aisle can be upgraded to Superflat tolerances in a single day.
- If a good general standard floor has been produced by the Laser Screed contractor, the Laser Grinder® can be set up to grind ‘isolated sections’ of the narrow aisles.
- The left and right load wheel tracks are upgraded simultaneously, or the whole aisle width can be treated.
- The grinding can be performed before, during or after the racking is installed and does not affect the critical path of the construction programme.
- The grinding operation is dust-free and does not affect other trades operating in adjacent aisles.
- Construction programmes can usually be reduced by significant amounts, giving a client / end user early occupation.
- Many flooring contractors are able to install good quality Laser Screed® floors.
